We offer a full line of commercial and industrial grade water filters for process water makeup and potable/drinking water with either city line pressure or with pump assistance.
With Rayne of the Valley’s focus on the customer, we can meet your needs with hands free solutions, or train your team on daily operation of any water system.
Local to the Greater Los Angeles Area we have the capability in servicing all water filtration system needs in the Greater Los Angeles Area. Our experienced service team will make your water purity system a priority to run flawlessly and hands free as possible. With 100s of years of combined experience, our service team has the knowledge and capability to service your water conditioning or softening equipment to meet any demand.
Our industrial and commercial water filtration systems are available at any water demand or seismic requirements with custom configuration. Installation and support are standard. Our pumps, meters, controllers, and skids are designed to simplify your installation. Rayne of the Valley is capable of design, sizing, delivery, installing, and continued maintenance. We are capable of exchanging filtration media, provide regeneration chemicals, chlorine injection, or regeneration holding tanks. We can provide repair on all types of water filters from any manufacturer.
We are proud to have clients in most industries. We can even provide water filtration equipment in a worry-free installation to meet any seismic requirement, whether your water source is well or city water, at any TDS.
Arsenic, Antimony, Ferric/Ferrous Iron, no project is too big or too small.
Our expertise with water filtration is beyond technical equipment knowledge, we design and manufacture. Our expert staff will help you design and install equipment to meet any water demand. Our staff can repair, exchange media (rebed), replace tanks, give hands free salt solutions, and help you run more efficiently using less salt.
Give us a call toll free with any questions about your current or future system, (800) 594-3300 or feel free to contact us.
Multimedia Filters
Using Sand, garnet, and Anthracite we are able to filter to the 5-10 Micron Range. This highly efficient filter has no regenerate chemicals, and removes anything collected in the backwash cycle.
Filter-AG® filters
Using a non-hydrous silicon dioxide media for suspended solids removal down to the 20-40 micron range. The fractured edges and irregular surface of the media creates less pressure drop by allowing deeper sediment penetration without caking and blinding the bed surface. Filter-Ag has a lighter weight than traditional sand media thereby requiring lower backwash rates and thus better water conservation.
Iron Removal Filters
Water Filtration system capable of reducing iron, manganese, and hydrogen sulfide using greensand plus filter media. Greensand Plus is formulated from a glauconite coated with varying types of manganese oxides. Iron (Fe), manganese (Mn), and hydrogen sulfide (H2S) are captured in the media bed, and removed through automated backwash cycles. The sytem then will regenerate the media with permanganate (KMnO4) solution or a continuous chemical feed of KMnO4, chlorine, or a combination of both.
‘GAC’ Activated Carbon Filters
Granular Activated Carbon (GAC) reduces taste, odor, and dissolved organic material from municipal and industrial water supplies. Chlorine Removal makes this a must before any Reverse Osmosis System.
Calcite Neutralization Filter
Calcite is used to neutralize low pH water causing less corrosiveness to metal piping. Calcite is used to reduce the potential leaching of copper. The calcite does deplete over time and will need to be replaced based on usage.